In order to protect sensitive microprocessors and circuitry, use static discharge equipment, such as anti-static wrist straps, when accessing internal components.Ĩ. When connecting cables/FFC to the connectors on circuit boards, connect them straight to the connectors to avoid slant insertion.ħ. When handling FFC, take care not to let the terminal section of FFC touch metal parts. To prevent the circuit boards from short-circuiting, be careful about the following when handling FFC or cables. There is a risk to damage the Main Board if the Head FFC is short-circuited with the capacitors on the Main Board electrically charged, therefore, after the power turns off or after motors are driven, leave the printer untouched for approximately 30 seconds to discharge the capacitors before starting disassembly/ reassembly.Ħ. The capacitors on the Main Board may be electrically charged right after the power turns off or after driving motors which generates counter electromotive force such as when rotating the PF Roller or when moving the CR Unit. Replace malfunctioning components only with those components provided or approved by Epson introduction of second-source ICs or other non-approved components may damage the product and void any applicable Epson warranty.ĥ. Never connect this product to the power source whose voltages is different from the rated voltage.Ĥ.
Epson l210 ink level serial#
The power rating of this product is indicated on the serial number/rating plate. No work should be performed on this product by persons unfamiliar with basic safety knowledge required for electrician.ģ. Repairs on Epson product should be performed only by an Epson certified repair technician.Ģ. Failure to comply may lead to personal injury or damage of the product.ġ. When using compressed air products such as air duster, for cleaning during repair and maintenance, the use of such products containing flammable gas is prohibited. If any ink gets in your eyes, wash your eyes with clean water and consult a doctor immediately.Ģ. Always wear protective goggles for disassembly and reassembly to protect your eyes from ink in working. Failure to comply may lead to personal injury or loss of life.ġ. If you need to perform the work with the power cable connected to a power source, use extreme caution to avoid electrical shock. Connecting to a power source causes high voltage in the power supply unit and some electronic components even if the product power switch is off. When performing works described in this manual, do not connect to a power source until instructed to do so. Always disconnect the product from the power source and peripheral devices when servicing the product or performing maintenance.Ģ. Failure to comply could result in serious bodily injury or loss of life.ġ.
2.1.5.2 Factors which Affect the Safety of Service Personnel such as Ink Leakage during Operation.2.1.5.1 Factors which Affect the Print Quality.2.1.5 Checks and Precautions before Disassembling.2.1.4 Standard Operation Time for Servicing the Product.How do I fix initial ink charging is not complete Epson l120?Įpson L120 initial ink charging is not complete.
The ink charge is the recommended way of getting ink into the printer for the first time or for flushing the ink out of the printer with cleaning solution. Subsequently, one may also ask, what is Epson ink charge?īackground: The ink charge is a very powerful utility that allows ink to move very rapidly through the printer.
Attach the power cord to the Epson Expression et 2650 printer and then power it up with an electrical outlet. Fill the ink tank with the corresponding ink bottle and close them with their caps. Likewise, how do you charge the ink on an Epson ET 2650? Strip off the ink bottle's packaging and unscrew its lid for Epson ET 2650 setup.
0 kommentar(er)
